|
Library
of Sample CDOT Plan Sheets
Disclaimer:
These are only generic examples of commonly used sheets in a CDOT set
of highway plans. They are not intended to be used "as is",
but to be edited according to the requirements of each design project.
They may be replaced by other appropriate sheets. If you have any questions
or comments. please call the Standards and Specifications Unit at 303-757-9393.
All drawings are
in version AutoCAD R14, except for the Standard Plans List
sheets, which are in MicroStation V8. If an AutoCAD drawing
file does not open after picking on it's link, or you get a "Drawing
file not found" window, you must save it (right mouse click on
it's link) to your computer's hard drive, then view it from there.
Please click on one of the appropriate links below, then download the
desired sheet to your hard drive, then open the drawing to edit it.
The pdfs are for a quick references.
|
Stormwater
Management Plan -SWMP
For
information only to fulfill the CDPS-SCP (Colorado Discharge
Permit System - Stormwater Construction Permit)
There
are two ways to fill out the SWMP sheets and create
MicroStation drawings.
|
|
1.
Create the MicroStation drawings via the "Copy and Paste
Special" method from the changes made directly to the
SWMP Text Template document in Word. Further instructions are inside the MicroStation drawing.
(The PDFs are non-editable and are for viewing by people who
do not have MicroStation on their computer.)
|
|
SWMP
Text Template Document
|
Sheets
1 thru 4
pdf
|
|
2.
Edit directly the MicroStation drawings with the SWMP text
already part of the drawings.
|
|
Sheet
1 of 3
MicroStation
pdf
|
Sheet
2 of 3
MicroStation
pdf
|
Sheet
3 of 3
MicroStation
pdf
|
|
|
Tabulation
Sheets
|
Typical
Plan Set Sheets
|
Typical
Write Up Plan Set Sheets
|
|
Earthwork, Guardrail, Fencing, and Delineators tabs
|
|
Typical CDOT Title Block
|
|
M&S Standards sheet
|
|
|
General Notes sheet
|
|
|
Structures Quantities and Guardrail tab
|
|
Plan and Profile sheet
|
|
Plan and Profile sheet
|
|
|
Storm
Water Management and Seed tab
|
|
Profile sheet
|
|
Profile sheet
|
|
|
Surfacing Quantity tab
|
|
M&S Standards Plans List for the October 1,
2000 M&S Standards (only to be used on finished plans
designed before July 4,
2006).
|
|
M&S Standards Plans List for the October 1, 2000
M&S Standards (only to be used on finished plans
designed before July 4, 2006).
|
|
|
|
M&S Standards Plans List for the July 4, 2006 M&S Standards (only
to
be used on finished plans designed after July 4, 2006).
|
|
M&S Standards Plans List
for the July 4, 2006 M&S Standards (only to be used on
finished plans designed after July 4, 2006).
|
|
|
Traffic
Control Devices tabs
|
|
Survey Tabulation sheet
(Revised
on 04/28/08)
|
|
Survey Tabulation sheet (Revised
on 04/28/08)
|
|
|
|
Superelevation
Crowned and Divided Highways
Superelevation
Streets
|
|
|
|
Utility
tabs
|
|
Title and Location sheet
|
|
Title and Location sheet
|
|
|
|
|
Typical Section sheet
|
|
Typical Section sheet
|
|
|
|
|
ROW Title
Block
|
|
|
|
|
